Terminal Block

Spring Terminal Block

N1 Spring Terminal Block

Description:

Open the spring with a screwdriver: insert the screwdriver along with the inner sidewall of square hole to open the spring (you can observe from the round hole). Then insert the screwdriver to the bottom, thus the spring is fully opened while the screwdriver is remained in the square hole.
Stripping length of the conductor should be made according to the operating manual.
When leading wire into the round hole, if it is stranded wire, please make sure that it hasn't been branched off. The stranded wire should be led into the hole wholly.
Insulation sheath of the conductor should be led into the round hold of terminal, for example, for a conductor of 2.5mm² or 4mm², their insulation sheath should be led in for 2-3mm. For thicker conductors, the insulation sheath should be led in deeper.
While withdrawing the screwdriver, the conductor has been finished wiring. Draw the conductor gently, if it cannot be drawn out, it means it has been well wired.
Make a final examination, you can press and bend the conductor at the connection hole, and it is in good condition if you cannot find the copper wire.


Type	N1-1.5	N1-2.5	N1-4
Color	Grey, Blue, Orange, Red, Black, Yello
Size	52mm(2.05in) x 27mm(1.06in)	53mm(2.09in) x 28mm(1.10in)	59mm(2.32in) x 29mm(1.14in)

Type	N1-6	N1-10	N1-16
Color	Grey, Blue, Orange, Red, Black, Yello
Size	74.5mm(2.93in) x 32.5mm(1.28in)	78mm(3.07in) x 35mm(1.38in)	94.5mm(3.72in) x 37.5mm(1.48in)

Type	N1-1.5/PE	N1-2.5/PE	N1-4/PE
Color	Kelly
Size	52mm(2.05in) x 27mm(1.06in)	53mm(2.09in) x 28mm(1.10in)	59mm(2.32in) x 29mm(1.14in)

Type	N1-6/PE	N1-10/PE	N1-16/PE
Color	Kelly
Size	74.5mm(2.93in) x 32.5mm(1.28in)	78mm(3.07in) x 35mm(1.38in)	94.5mm(3.72in) x 37.5mm(1.48in)


Type	W279-325	W279-328	W279-339	W279-308
Color	Grey	Orange	Grey	Orange
Items	2 Line Terminal Block End Cover		3 Line Terminal Block End Cover

Type	W279-402	W279-422	W279-409
Color	Grey	Kelly	Grey
Items	Adjacent Jumper Wire		Distance Jumper Wire

N2 Spring Terminal Block

Description:

Open the spring with a screwdriver: insert the screwdriver along with the inner sidewall of square hole to open the spring (you can observe from the round hole). Then insert the screwdriver to the bottom, thus the spring is fully opened while the screwdriver is remained in the square hole.
Stripping length of the conductor should be made according to the operating manual.
When leading wire into the round hole, if it is stranded wire, please make sure that it hasn't been branched off. The stranded wire should be led into the hole wholly.
Insulation sheath of the conductor should be led into the round hold of terminal, for example, for a conductor of 2.5mm² or 4mm², their insulation sheath should be led in for 2-3mm. For thicker conductors, the insulation sheath should be led in deeper.
While withdrawing the screwdriver, the conductor has been finished wiring. Draw the conductor gently, if it cannot be drawn out, it means it has been well wired.
Make a final examination, you can press and bend the conductor at the connection hole, and it is in good condition if you cannot find the copper wire.


Type	N2-1.5	N2-2.5	N2-4
Color	Grey, Blue
Size	42.5mm(1.67in) x 30.5mm(1.20in)	45mm(1.77in) x 30.5mm(1.20in)	45mm(1.77in) x 32.5mm(1.28in)

Type	N2-6	N2-10	N2-16
Color	Grey, Blue
Size	46.5mm(1.83in) x 37mm(1.46in)	62mm(2.05in) x 41.5mm(1.63in)	58mm(2.28in) x 45.5mm(1.79in)

Type	N2-2.5/PE	N2-4/PE	N2-6/PE
Color	Kelly
Size	45mm(1.77in) x 30.5mm(1.20in)	45mm(1.77in) x 32.5mm(1.28in)	46.5mm(1.83in) x 37mm(1.46in)

Type	N2-10/PE	N2-16/PE
Color	Kelly
Size	62mm(2.05in) x 41.5mm(1.63in)	58mm(2.28in) x 45.5mm(1.79in)

Type	N2-6S	N2-6A (Fuse for 5x20mm)
Color	Grey
Size	87.5mm(3.77in) x 37mm(1.46in)	62mm(2.44in) x 54mm(2.13in)
Items	Disconnection Terminal Blocks	Designation Non-Fuse Terminal Blocks